What are Roxtex cable seals?
Roxtec, the market leader in the modular-based sealing industry, offers a complex sealing system that protests openings for cables and pipes for hazards including: fire, gas, and water. Their multidiameter sealing modules (available in 6 sizes) feature removable layers, which allow them to be customized to fit a variety of cable and pipe sizes. Roxtec also offers a wide selection of frames to suit any application. Roxtec cabinet seals are easy to install and help neatly organize and form a protective seal around the cables and pipes going into your enclosure.
How it works:
- Adapt modules that will hold cables or pipes by peeling off layers until you reach the gap you see in picture 2.
- Achieve a 0.1-1.0 mm gap between the two halves when held against the pipe or cable.
- Lubricate all modules for the frame thoroughly, both the inside and outside surfaces.
- Insert the modules according to your installation plan. It is recommended to seal cables/pipes at the bottom of the frame and spare modules on top.
- Insert a stayplate on top of every finished row of modules.
- Insert the Roxtec wedge and tighten the screws until full stop.
- Attach the wedge clip to the wedge bolds to check that the wedge is properly tightened.
Our Offering:
BgB Supply offers Roxtec cable seal kits with all the components you need to create a complete seal.
In-stock kits include the following frames:
RG M63 – The three different standardized kit configurations and rounded frame make it possible to seal one to nine pre terminated cables, ranging from 3.5mm to 32.5mm.
CF – With integrated compression, this frame type is suitable for enclosures where many cables need to be routed in areas with limited space.
ComSeal –ComSeal is a solution for fast and simple sealing of openings with cables in cabinets. The Roxtec ComSeal frames can be attached either to the inside or the outside of a cabinet.
ComSeal LW - The Roxtec ComSeal LW is an IP44 solution for simple and flexible sealing of openings with cables in cabinets. The Roxtec ComSeal LW aluminum frames can be attached either to the inside or the outside of a cabinet.
C RS T - The Roxtec C RS T sealing solution is available in four different sizes, which seal single cables and pipes from 3.6mm to 30mm. The C RS T kit is a complete sealing solution, which consists of a threaded sleeve with gasket, a counter nut and a round C RS Seal for a single cable or pipe. The Roxtec C RS T kit sealing solution makes installation of pre terminated cables or pipes easy, such as in cabinet walls and other types of similar structures.
EzEntry - The EzEntry seal is designed to simplify cable sealing in the equipment manufacturing industry. It enables routing and sealing multiple pre-terminated cables of different sizes - in one single frame opening. The seal has a lightweight composite frame with integrated gasket. It’s a single-side installation with an integrated compression.
If you need a frame size and material type that we do not have in stock please submit a request via our Custom Stocking Form and we will bring it into stock for you.