How-to install a Rittal enclosure filter fan:

1. To start the filter fan installation slide bracket from the filter fan assembly into pre-cut hole in enclosure and snap into place.
2. Install the fan using 4 included screws. Hold the fan on the inside of the enclosure and install the screws through the hole cut-outs on the mounting bracket. We found it easier to install the screws caddy-corner.
3. Once all the screws are installed, insert the air filter and cover onto the bracket on the front of the enclosure and snap into place. To finish the assembly use the included clip to fasten the filter to the assembly.

 

 

You can purchase Rittal enclosure filter fans from our website BgBsupply.com.